Pull the cursor from this edge to set the bend distance.Then select the linear edge from which the bend distance will be defined.The first step is to select the face that will bend. Start with a solid that has at least one linear edge.This option of the Bend tool enables you to define where the bend starts from a linear edge of the planar face. When the parameters are set, select Finish from the local menu or Inspector Bar to complete the bend.The Angle is measured from the plane of the bending face.The Neutral Depth is the distance into the depth of material, along which there will be no tension or compression.The bend now starts from the other end of the solid. In this case, the bottom face of the bent solid meets the selected line (or its projection). In this case, the center of the bent solid meets the selected line (or its projection into the solid). The preview shows how the final result will look. The default method is Start, in which the bend starts where the top face meets the selected line. The line must lie on the solid face you selected. Then select the line about which you want to bend the solid. Start with a shallow Box or a Simple Extrude based on a polyline or rectangle.Note: You can unbend the object using Unbend Sheet. Bend Sheetĭefault UI Menu: Modify/Modify 3D Objects/Bending/Bend Sheetīends a solid ACIS object, most commonly a sheet with thickness (Box). These tools are available on the Modify toolbar, which you can display by right-clicking in any toolbar area and selecting 3D Modify. These tools are used for bending existing sheets and tubes (pipes) or for adding flanges on sheets and tubes. Using the Trim tool with Architectural Objectsĭrafting Palette, Creating Standard Viewsĭefault UI Menu: Modify/Modify 3D Objects/Bending Profile Objects and Face to Face ModificationĬreating 3D Objects by Editing 2D Objects
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |